First, the advantages of our company's aluminum-plastic board:
1. Super peeled
The aluminum-plastic composite board adopts a new process, which improves the most important technical index of the aluminum-plastic composite board-peeling strength, and improves the flatness and weather resistance of the aluminum-plastic composite board.
2.Super weather resistance
Due to the use of KDF-500-based PVDF fluorocarbon coatings, weather resistance has a unique advantage. It will not damage its beautiful appearance, even under the hot sun or in severe snow and ice, and will not fade for 20 years.
3.Excellent fire performance
Aluminum-plastic composite board with flame-retardant PE plastic core in the middle, both sides of the aluminum layer are difficult to burn. Therefore, it is a safe fireproof material that can meet the fireproofing requirements of building codes.
4, impact resistance
Strong impact resistance, high toughness, bending will not damage the topcoat, strong impact resistance, wind and sand damage will not occur in large areas.
5. Uniform coating and various colors
After chemical treatment and the application of Henkel's thin film technology, the adhesion between the coating and the aluminum-plastic panel is uniform, and the colors are various, allowing you to choose more space and fully display your personalization.
6. Materials are easy to process
The aluminum-plastic composite panel weighs only about 3.5-5.5 kg per square meter, so it can reduce the damage caused by earthquakes and is easy to transport. Its excellent workability requires only simple woodworking tools to complete the cutting and cutting. Various shapes (such as planing, bending into arcs, and right angles) can work with the designer to make various changes. Easy and quick installation, reducing construction costs.
7, easy maintenance
The aluminum-plastic composite board has a significant improvement in pollution resistance. China's urban pollution is relatively serious. After several years of use, it needs to be maintained and cleaned. Due to its good self-cleaning properties, only neutral detergents and water are required. After cleaning, the circuit board will remain as it is.
Standard size: unit: mm, length X width X thickness: 1220X2440X4mm; 1220X2440X3mm maximum size specification: 1600mmX6000mm
Surface coating: fluorocarbon resin (PVDF), polyester resin (PET) and other imitation marble and wood grain surfaces
Core material: flame retardant core material, high pressure low density polyethylene (PE), etc.
①External wall aluminum-plastic composite board series: there are five specifications of aluminum plate thickness: 0.30mm, 0.35mm, 0.40mm, 0.45mm, 0.50mm; coating is made of fluorocarbon resin (PVDF) and polyester resin (PET). .
②Inner wall aluminum-plastic composite board series: there are five specifications of aluminum plate thickness: 0.30mm, 0.21mm, 0.18mm, 0.15mm, 0.12mm; the coating is made of polyester resin (PET).
③ Refractory aluminum-plastic composite board series: there are six specifications of aluminum plate thickness: 0.25mm, 0.30mm, 0.35mm, 0.40mm, 0.45mm, 0.50mm; the coating has a fluorocarbon resin (PVDF). Board thickness can reach 3mm ~ 6mm;
Special color
According to the different requirements of customers for different colors, different colors can be adjusted.
application
Curtain wall panel
2. Reconstruction and renovation of old building exterior walls
3. Balcony, equipment unit, indoor compartment
4, Kanban, signs, advertising signs
Non-standard size
Customization can be customized according to customer requirements, size is negotiated in advance.
